|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
MMET - 200 |
WE ARE SUPPLIERS OF THE UNDERMENTIONED CRUDE OIL AND REFINED PRODUCTS
1. NIGERIAN BONNY LIGHT OIL
1. Specific Gravity at 60F/15.55C: 0.8397-0.8498
2. API Specific Gravity at 60F/15.55C: 35.0-37.0
3. Density at 60F/15.55C-Cg-CM-MAC: 0.85Max
4. Pour Point: <40F/4.44C
5. Sulfur Content, pctWt: 0.14Max
6. Colour: Dark Brown
7. Salinity: TB at 0.10%/BS&W 47Max
8. Acid Number: 0.39Max
9. Reid Vapour Pressure: 6.52psig Max
10. Water & Sediment Content, Pct (%): 1.00%Max
11. Iron Wt, ppm: 1.00Max
12. Nickel Wt, ppm: 4.00Max
13. Vanadium Wt, ppm: 2.00Max
2. IRANIAN LIGHT
TESTS Results Remark
R.V.P (PS) 7.0
Specific Gravity At 16.6/16.8C 0.5545
A.P.I. Gravity at 15 BC 31-33
Water % Vol 0.02
Water and Sediment NIL
Hydrogen Sulphide PPM NIL
Salt NACL PPM 5.0
Sulphur P% WT 1.5
Asphalt Tense % WT 1.2
Pour Point C 1.2
Wax % WT 27
Concealing Point of Wax C
Ash P% WT
KIN VIS AT 80F 0.8
KIN VIS AT 100F 6.94
KIN VIS AT 120F n.a.
KIN VIS AT 140F n.a.
Flash Point C <20
Nitrogen Content (%WT) 0.04
Cross Heating 108.10
Characterization Factor (KUOP) 12.0
Carbon Residue (Corazon WT %) 3.88
3. Russian Origin Aviation Kerosene Jet Fuel Colonial Grade 54
ADDITIVES
Antioxidant in hydroprocessed fuel mg/l min 17
Max 24
Antioxidant non hydroprocessed fuel mg/l max 24
Static dissipater first doping ASA-3 mg/l max 1
Stadis 450 mg/l max 3
COMBUSTION PROPERTIES
Specific energy, net mj/kg min 18.4 D4808
Smoke point mm min 19 D1322
Luminomitter number min 45 D1740
Naphtalenes %vol max 3 D1840
PROPERTI UNIT MIN-MAX RESULT TEST-IP METHOD ASTM
Composition
Total Acidity mg KOH/g max 0.01 354 D3242
Aromatics %vol max 22.0 158 D1318
Sulphur, Total %mass max 0.30 107 D1266/2622
Sulphur, Mercaptan %mass max 0.003 342 D3227
Doctor, test 30 D4952
VOLATILY
Initial Boiling Point Centigrade max Report 123 D96
10% vol at C 240
20% vol at C Report
50% vol at C Report
80% vol at C Report
End point Centigrade max 300
Ricovered recidules %vol, max 1.5
Loss %vol, max 1.5
Flesh Point Centigrade max 42 170/303 D56/3828
Density at 15 C Kg/m2 min/max 776/840 180/385 D1298
LOW TEMPERATURES PROPERTIES
Freezing Point Centigrade max -40 15 D2256
CORROSION
Corrosion, copper (2hrs at 100C) max 1 154 D130
Corrosion, silver (4hrs at 50C) max 1 227
STABILITY
Thermal stability control, Temp. 280C 323
Filter pressure, differential mm.Hg max 25
Tube deposit rating (visual) max <3
CONTAMINATIONS
Existent Gum mg/100ml max 7 131 D361
Water reacoin, interface rating max 16 258 D1084
Fuel with static dissipator additives min 75 D3648
Fuel without static dissipator additive min 85
CONDUCITY
Electrical conductivity p3/m Report
4. D 2 (DIESEL) GAS OIL ? LO.2/62 -GOST 305-82
1. Cetane index, min 45
2. Fractional composition:
50 % is distilled under the temperature 0°C not more 274
96 % is distilled under the temperature 0°C not more 360
3. Cinematic viscosity under 20 °C cct 4.3
4. *Solidification °C, -10
5.* Temperature of cloudiness °C, -5
6. Flesh point in closed crucible, 0°C,
min Locomotive and vessel diesel and gas turbines 63
7. Fraction of total mass of sulphur in per cents 0.2
8. Fraction of total mass of merchantman sulphur per cents 0.01
9. Content of hydrogen sulfide is absent
10. Test on copper plate passed
11. Content of water - soluble acid and alkali is absent
12. Content of actual tar mg on 100 cm cub, of fuel, 20
13. Content of water is absent
14. Acidity mg KOH on 100 cm cub, of fuel, 0.5
15. Iodine index g of iodine on 100 g of fuel, 2
16. Ash content % 0.005
17. Cocking of 10 - per cents remainder, % 0.5
18. Coefficient of filtration 2.0
19. Content of mechanical admixtures is absent
20. Density under 20°C kg on m cub 832
21. Colour, 2
22. Bacteriae OFU Fibre/it 1000
Guaranteed period of storage - 5 (five) years from the day of production
(*) Summer from march to October ( PP-5.0 C) ( CP 0 C)
Winter from November to February ( PP -10.0 C) ( CP - 5.0 C)
5. SAUDI LIGHT CRUDE OIL SPECIFICATION
API GRAVITY : 33.34
SEDIMENT CONTENT : 0.1
ASTM STABILISED GRAVITY : 34.5
WAX ? WT PERCENT : 2.9
VANADIUM ppm V200 : 11.0
GROSS HEATING VALUE : 19.23
REID VAPOUR PRESSURE : 2.0
SALT CONTENT, PPM NaCl : 3.8
SULPHUR, WT PERCENT : 1.5 MAX
ASH, PPM : 100.0
COMP. CARBON RESIDUE, WT PERCENT 3.1
VISCOSITY, CP : 55.0
POUR POINT : 35.0
6. LPG Specification
Specifications required for the LPG. 50% Propane and 50% Butane mix:
A. BUTANE
Typical Test Unit Design Actual ASTM Method
Ethane Mole% 0.08 G.C
Propane Mole% 0.95 2 Max G.C
Total C4 Mole% 98.3 97.5 Min G.C
Total C3 Mole% 0.75 0.82 Max G.C
SP-GR at 60/60OF To Be Reported D-2598
Cu. Corrosion 1 Hr at100 No.1 A Max D-1838
Total Sulphur PPM 30 Max Microcoulometry
H2S PPM Nil D-2420
VP at 100 PSIG 70 Max D-2598
H2O Content PPM 10 Max Shaw Dew Pt
Residue PPM 0.05 Max D-2158
B. PROPANE
Typical Test Unit Design Actual ASTM Method
Ethane Mole% 0.47Summer 0.4 Max G.C0.509Winter
Propane Mole% 98.17Summer 98 Min G.C 98.17Winter
Butane Mole% 1.353Summer 1.4 Max G.C 1.249Winter
Pentane & Heavier Mole% 0.01 Max G.C
SP-GR at 60/60OF To Be Reported D-2598
Cu Strip No.1 A Max D-1838
Sulphur (Volatile) PPM 30 Max Microcoulometry
H2S PPM 5 Max D-2420
VP at 100 PSIG 200 Max D-2598
H2O Content PPM 10 Max D-2713
BUTANE PROPANE MIX SPECIFICATIONS
PROPANE ? BUTANE GAS MIXTURE???????????????LPG
MIXTURE PERCENTAGES:
PROPANE ? PROPYLENE?????????.50%
BUTANE ? BUTYLENES??????????50%
VAPOR?????????????????????????37.8 MAX 1380 KA
SULFUR?????????????????????????.MAX 343 MG/M3
EVAPORATE WASTE MATERIAL???????????????...MAX 100 ML
D Ci at h?????????????????????????..200,000
7. Specifications: NAPTHA
Specifications : Special Instructions - ODOURLESS
PROPERTY METHOD OF TEST SPECIFI.
COLOUR SAY BOLT ASTM D 156 +20 Min.
Density .Kg/Litre at 15 Deg.C ASTM D 4050 OR 1298 0.685 Min-0.720
Distillation ASTM D 86 To be Reported
IBP Deg.C 50 max
10% Evaporated Deg.C *
50% Evaporated Deg.C *
90% Evaporated Deg.C *
End point Deg.C 170 Max
Lead Content. Micro g/Kg UOP 3500 200 Max
PONA ASTMS 1319/2159 To be Reported
Paraffin'sVol% To be Reported
Aroratics Vol % To be Reported
Olefins Vol % 1.0 Max
Bromine Number ASTMD 1266 1.0 Max
Sulfur Mass ASTMD 1266 0.07 Max( 700 ppm max)
Mercaptan *** 10 ppm Max.
Vapour pressure .Reld. *
KPA at 37.8 Deg.C ASTMD 323 75 Max
D. Test *** Negative.
8. Product A, Mazut ? 100
Specification 80001 (1 %):
Description Typical Guaranteed Method
Specification gravity at 16.6 C. Deg 0.8832 (0.8870) D - V 1298
Kin. Viscosity at 40 C. Deg (CST) 9.35 Less than 12.00 D - V 445
Kin. Viscosity at 100 C. Deg (CST) 1.06 Less than 1.50 D - V 445
Viscosity Index 95 95 MIN D -V 2270
Flash Point (COC). C. Deg 110 110 MAX D - V 92
Pour Point C. Deg -3 -9Max D - V 97
Total Acid No. MG KOH/GH 0.013 0.05Max D - V 974
Conradson Carbon WT % 0.08 0.1Max D - V524
Ash Content (WT%) 0.008 0.01Max D - V 482
Water Content Vol% Nil Nil D - V 95
Colour (ASTM) 1.5 1.5Max D - V 1500
Sulphur WT% 0.75 1.5Max D - V 4294
Oxidation Test (Viscosity Ratio) 1.2 1.2Max IP 48
Vanadium PPM 50Max
Sodium PPM 45Max
9. Product B, Mazut ? 100
Specification 80002 (1 %):
Description Typical Guaranteed Method
Typical Guaranteed Method
Specification gravity at 16.6 C. Deg 0.8800 (0.8870) D - 1298
Kin. Viscosity at 40 C. Deg (CST) 9.35 Less than 12.00 D - 445
Kin. Viscosity at 100 C. Deg (CST) 1.06 Less than 1.50 D - 445
Viscosity Index 95 95 MIN D - 2270
Flash Point (COC). C. Deg 60 75 MAX D - 92
Pour Point C. Deg -3 -9Max D - 97
Total Acid No. MG KOH/GH 0.013 0.05Max D - 974
Conradson Carbon WT % 0.08 0.1Max D -524
Ash Content (WT%) 0.008 0.01Max D - 482
Water Content Vol% Nil Nil D - 95
Colour (ASTM) 1.5 1.5Max D -1500
Sulphur WT% 0.75 1.5Max D - 4294
Oxidation Test (Viscosity Ratio) 1.2 1.2Max IP 48
Vanadium PPM 150Max
Sodium PPM 100Max
Cetane Index 43 52 Max
10. BENZINE
Specification:
Sulphur - max. 1 mg/kg
Chlorine - max. 1 mg/kg
Toluene - max. 30 mg/kg
Content of benzene - min. 99.7%
Crystallisation point: min. 5.3 C
Density at 20 C - 879 - 881 kg/m3
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page